An extremely simple and low cost Sine/Square wave generator based on the Analog Devices AD9835 Direct Digital Synthesis (DDS) Generator chip. The frequency can be set for any frequency from 1Hz to 10MHz in 1Hz resolution steps! All this with three push buttons and a novel “sliding window” LED display. The controller chip is a Microchip PIC16F628. There is no wiring, and the PCB fits into a standard UB3 Jiffy Box.
Read the complete Project Article in HTML format.
The Schematic Diagram in GIF format.
The Front Component Overlay in GIF format.
The Back Component Overlay in GIF format.
The Front Panel in ZIPed PDF format
The Front Panel in ZIPed EPS format
The PCB file in Protel format.
The SOURCE CODE and HEX file for a 16F628 and HiTech PIC C Compiler.
For more detail: 10MHz DDS Sine/Square Function Generator based on the AD9835 using PIC16F628
The post 10MHz DDS Sine/Square Function Generator based on the AD9835 using PIC16F628 appeared first on PIC Microcontroller.